1. <th id="mm4pw"><track id="mm4pw"></track></th>
      <em id="mm4pw"><object id="mm4pw"><u id="mm4pw"></u></object></em>
      <tbody id="mm4pw"></tbody>
      <li id="mm4pw"><acronym id="mm4pw"></acronym></li>

      1.  
        CHINESEENGLISH     
        Set as homepage  | Add to Favorites    
         
        Web search:  
         
         
         
         
          UV cross-linking products
          Thermoplastic compounds
          Poly Vinyl Chloride compounds
          Black polyethylene compounds
          Shield compounds
          Peroxide cross-linking
          One-step silane crosslinking
          Color Masterbatch
          Intumescent flame retardant
         
         
         
          Other polymer products
         
        Cable Material Divi.
        Flame Retardant Material Divi.
        UV Cross-linking Equipment Divi.
         
        UV cross-linking products
         

        Orient IFR-P601

        Introduction

        Orient IFR-P601is a kind of halogen-free intumescent flame retardant (IFR) based on nitrogen and phosphorous retardant elements. It can be mixed with polypropylene resins easily and shows lower loading, higher stability and lower price as compared to other IFRs. The polypropylene resins containingOrient IFR-P601possess superior mechanical properties and do not release any dioxin and hydrogen halide, which can pass UL94V-0 rate during the flame retardant tests.

        Product Index

         

        Thermalstability

        Recommended dosage

        *Notes: The above recommended dosage is not a product quality guarantee. Different equipments, techniques ofproduction and prescriptions may lead to different loadings. Please refer to the actual parameters.

        Application

         

         

         

        Points for attention

        1)Orient IFR-P601 decomposed at 250℃under nitrogen atmosphere. To avoid slightly foaming, the temperature of twin screw should be controlled lower than230℃. In addition, it does not need screen mesh and should keep vacuum during the extruding process.

        2) Inorganic fillers such as CaCO3, Caron black, BaSO4and Mg(OH)2, will reduced the retardant properties.

        3)For PP resins with high melting index and products lower than 1.6 mm, these systems should be added anti-dripping agents to enhance the viscosity and to avoid melting dripping.

        4) The introduction of polypropylene wax can enhance the glabrous property of the retardant PP products, but the recommended loading is 0.5% and the maximum loading should be lower than 1%.

        5) When the loadings of Orient IFR-P601 in PP resins with low melt index are higher than 28%, the products with 1.6 mmthickness can pass the UL746 Ctest. For the high melt index PP resins, the products can also pass the UL746 Ctest with additional anti-dripping agents.

        Use and Storage

        Orient IFR-P601 products are packaged up by aluminoplastic bags with 25±0.2 kgin each one. The products should be stored in ventilating and drying warehouse and should be dried for 2-4 hours under 90-110℃after a long time preservation.

         
         
         
         
        地址:黑龍江省佳木斯市高新技術開發區中華路7號       電話:0454-6075500       傳真:0454-6075522        黑ICP備10001233號-1