1. <th id="mm4pw"><track id="mm4pw"></track></th>
      <em id="mm4pw"><object id="mm4pw"><u id="mm4pw"></u></object></em>
      <tbody id="mm4pw"></tbody>
      <li id="mm4pw"><acronym id="mm4pw"></acronym></li>

        Set as homepage  | Add to Favorites    
        Web search:  
          UV cross-linking products
          Thermoplastic compounds
          Poly Vinyl Chloride compounds
          Black polyethylene compounds
          Shield compounds
          Peroxide cross-linking
          One-step silane crosslinking
          Color Masterbatch
          Intumescent flame retardant
          Other polymer products
        Cable Material Divi.
        Flame Retardant Material Divi.
        UV Cross-linking Equipment Divi.

        Orient IFR-P602


        As an upgrade product based onOrient IFR-P601,Orient IFR-P602contains high efficient assistant agents and is produced by special process. As compared toOrient IFR-P601, it possesses better waterproof property.The polypropylene resins containingOrient IFR-P602present low density, low smoke release, low corrosiveness for molds and high cost performance.

         Product Index



        Recommended dosage

         *Notes: The above recommended dosage is not a product quality guarantee. Different equipments, techniques of production and prescriptions may lead to different loadings. Please refer to the actual parameters.





        Points for attention

        1)Orient IFR-P602 decomposed at 260℃under nitrogen atmosphere. To avoid slightly foaming, the temperature of twin screw should be controlled lower than230℃. In addition, it does not need screen mesh and should keep vacuum during the extruding process.

        2) Inorganic fillers such as CaCO3, Caron black, BaSO4and Mg(OH)2, will reduced the retardant properties.

        3)For PP resins with high melting index and products lower than 1.6 mm, these systems should be added anti-dripping agents to enhance the viscosity and to avoid melting dripping.

        4) The introduction of polypropylene wax can enhance the glabrous property of the retardant PP products, but the recommended loading is 0.5% and the highest loading should be lower than 1%.

        5) When the loadings of Orient IFR-P602 in PP resins with low melt index are 25%~30%, the products with1.6 mmthickness can pass the UL746 Ctest. For the high melt index PP resins, the products can also pass the UL746Ctest with additional anti-dripping agents.

        Use and Storage

        Orient IFR-P602 products are packaged up by aluminoplastic bags with25±0.2 kgin each one. The products should be stored in ventilating and drying warehouse and should be dried for 2-4 hours under 90-110℃after a long time preservation.

        地址:黑龍江省佳木斯市高新技術開發區中華路7號       電話:0454-6075500       傳真:0454-6075522        黑ICP備10001233號-1